How to set up a pickup truck tent

Below are instructions to set up the Camp-Right truck tent.  All truck tents follow the same principle, so you will get the idea.  Any tent you order will include complete instructions with diagrams.

1. With the tailgate down, place the tent in the truck bed with screen mesh facing up. Position the door at the back, and cab access sleeve in front. Slip the tailgate pocket and strap (material under the door) over the tailgate.

2.  Loosely attach inside green & red straps to your truck bed tie down points ( cleats ) inside bottom corners of the bed. Notice there are two straps for each corner cleat (8 total). If your truck bed does not have tie down points/cleats inside the bed, get inside erected truck tent and attach the front most two inside straps (right and left) together and snug the straps so they pull the tent sides inward. Run the back most inner straps (right and left side) through the slot between the bed and tailgate and attach to the rear bumper and snug them using the adjustor. If you use this configuration, you will only use four of eight straps (furthest out in each corner). Once you adjust the tent straps to your truck, next set up will be a breeze!

3. Attach the black outside side strap clips to the bottom of the truck and snug up the straps.

How to install a pickup truck tent

4.  Run all 4 poles thru the pole sleeves matching the color code pockets to the same color tent poles. Insert the pole ends into the pockets while raising the tent.  First the two center crossing poles and then the front and back poles. As you raise the truck tent, make sure tent pole sleeves slide evenly over the poles. Do not force this process or you make break a pole.

setting up a pickup truck tent

5.  Snug up the outside straps. Make sure all side material covers the truck bedsides to prevent rain from entering the tent. Check the front corner straps and adjust. 

installing a pickup truck tent

6. Position the rain fly over the tent matching the front cab access sleeve from both the tent and rain fly. Attach and adjust the buckles as necessary. Use of rain fly is optional. 

8.  When done camping, fold your clean & dry truck tent and put it into the easy loading storage bag.

9.  Do not drive with the tent set up on your vehicle.  Read and observe caution tag inside the tent.

10.  Pictured above awning accessory that can be attached over the tent door.  Use the alligator clips to attach awning to the rear most tent pole.  We don't include tent poles due to the length and shipping.  You can use sticks, a tree branch, or simply pick up tent poles at any camping or army surplus store.  Camp-Right awning has grommets in each corner for a pole pike.  Also included two guide lines with adjustors.

11.  Pictured above Camp-Right awning can be attached as side vestibule to protect gear or pets.  You can also use the Awning accessory as a gear cover in the rain or clip it inside the tent and use as a tent floor.  We're sure there are 101 uses be we can only think of 5-6 right now.

Look at our large selection of pickup truck tents.                  Every truck tent needs an air mattress.